Paints and Coatings​

The use of coatings in order to preserve materials and products, avoiding their corrosion, oxidation and deterioration, has increased and evolved over time.

At Polímeros Sintéticos we manufacture alkyd resins and gum rosin derivatives that work as a vehicle in the manufacture of paints and coatings, such as architectural, decorative, industrial and automotive paints, waterproofing, enamels, varnishes, wood sealants and traffic paint, among others.

Our wide portfolio of high quality and durable resins is characterized by their versatility, for which we have different families of resins according to their composition in order to meet the needs of each customer and the regulations of different locations.

Our poducts provide:
● Gloss ● Hardness ● Drying speed ● Adherence ● Color ● Protection

Applications

Automotive paint​
Primers
Architectonic paint​
Wood varnishes​
Industrial and domestic enamels​
Laquers and sealants
Traffic paint

Products

Chain Stopped Short Oil alkyds

+ View products

Chain stopped medium oil alkyds

+ View products

Medium Oil alkyds

+ View products

Long Oil alkyds

+ View products

Coconut alkyds

+ View products

Modified alkyds

+ View products

MALEIC RESINS

+ View products

water reducible alkyds

+ View products

Contact Us

  • +52 (55) 5394 3066​
  • josh@polimerossinteticos.com.mx

Site Map

Find Us

Guillermo Barroso 4, Fracc. Industrial Las Armas, Tlalnepantla, Estado de México, C.P. 54080

POLÍMEROS SINTÉTICOS S.A. DE C.V. ® ALL RIGHTS RESERVED   |  PRIVACY NOTICE
Scroll to Top
Resins with high gloss, quick drying, good resistance to yellowing, corrosion and weathering. Designed to formulate primers, PU varnishes, automotive refinish, industrial and baking enamels.
  • Viscosity
  • Acid Value
  • Color
  • Solids %
  • Solvent

ALQUIMEX 109

High gloss, quick drying, good hardness, good resistance to yellowing, corrosion and weathering. It has good compatibility with acrylic resins and isocyanates. Recommended for the formulation of automotive repainting enamels, industrial enamels and baking enamels, as well as anticorrosive primers and PU varnishes for wood.

TDS
  • Z1-Z3
  • 11 max
  • 3 max
  • 60%
  • Xylene

ALQUIMEX 109-50X

Version of Alquimex 109 with lower solids content and lower viscosity.

TDS
  • Z2-Z5
  • 12 max
  • 6 max
  • 50%
  • Xylene

ALQUIMEX 109LV-50X

Version of Alquimex 109-50X with lower viscosity.

TDS
  • X-Z
  • 12 max
  • 4 max
  • 50%
  • Xylene

ALQUIMEX 109-75X

Version of Alquimex 109 with higher solids content and higher viscosity. Which allows formulating low VOC enamels.

TDS
  • Z6 min
  • 15 max
  • 5 max
  • 75%
  • Xylene

ALQUIMEX 109-75BA

Version of Alquimex 109-75X cut in Butyl Acetate, which allows the formulation of low VOC and free HAP's enamels.

TDS
  • Z4-Z7
  • 14 max
  • 4 max
  • 75%
  • Butyl
    Acetate

ALQUIMEX 109LV-75BA

Version of Alquimex 109-75BA with lower viscosity.

TDS
  • Z-Z4
  • 12 max
  • 4 max
  • 75%
  • Butyl
    Acetate

ALQUIMEX 109-75MAK

Version of Alquimex 109-75X cut in Metil Amil Cetona, which allows the formulation of low VOC and free HAP's enamels.

TDS
  • Z4-Z6
  • 14 max
  • 4 max
  • 75%
  • MAK

Alquimex 109-75MAK-BA

Version of Alquimex 109 cut in Methyl Amyl Ketone and Butyl Acetate, which allows the formulation of low VOC enamels and free HAP's enamels.

TDS
  • Z3-Z6
  • 14 max
  • 4 max
  • 75%
  • MAK / Butil Acetate

Alquimex 109LV-75MAK-BA

Version of Alquimex 109-75MAK-BA with lower viscosity.

TDS
  • Z2-Z4
  • 14 max
  • 4 max
  • 75%
  • MAK / Butil Acetate

ALQUIMEX 109-80BA

Version of Alquimex 109-75BA with higher solids content and higher viscosity, which allows the formulation of low VOC and free HAP's enamels.

TDS
  • Z4-Z7
  • 14 max
  • 5 max
  • 80%
  • Butyl
    Acetate

Alquimex FAS-CC88X

High solids resin with high gloss for enamels and baking systems.

TDS
  • Z6-Z7
  • 10 max
  • 6 max
  • 88%
  • Xylene

ALQUIMEX 109LV-80BA

Version of Alquimex 109-80BA with lower viscosity.

TDS
  • Z3-Z5
  • 14 max
  • 5 max
  • 80%
  • Butyl
    Acetate

ALQUIMEX SC-50XF

Good gloss, drying, hardness and weather resistance. Recommended for the formulation of primers, industrial enamels, low-bake enamels and 2K PU varnishes.

TDS
  • X-Z
  • 15 max
  • 6 max
  • 50%
  • Xylene

ALQUIMEX SC-60X

Version of Alquimex SC-50XF with higher solids content and higher viscosity.

TDS
  • Z6-Z7
  • 15 max
  • 5 max
  • 60%
  • Xylene

ALQUIMEX SC-60XF

Version of Alquimex SC-60X with slightly improved drying.

TDS
  • Z6-Z7
  • 15 max
  • 5 max
  • 60%
  • Xylene
Resins with high gloss, quick drying, good resistance to yellowing, corrosion and weathering. Designed to formulate primers, PU varnishes, automotive refinish, industrial and baking enamels.
  • Viscosity
  • Acid Value
  • Color
  • Solids %
  • Solvent

ALQUIMEX SM-60A

Version of Alquimex SM-65X with lower solids content and diluted in Aromatic 100 for lower VOC contents.

TDS
  • Z1-Z3
  • 10 max
  • 7 max
  • 60%
  • Aromatic
    100

ALQUIMEX SM-60V

Version of Alquimex SM-65V with lower solids content and lower viscosity.

TDS
  • Z2-Z4
  • 10 max
  • 7 max
  • 60%
  • Mineral
    Spirit

ALQUIMEX SM-65V

Version of Alquimex SM-65X diluted in Mineral Spirit. Due to the type of solvent, it is recommended for formulating primers and industrial enamels.

TDS
  • Z4-Z6
  • 10 max
  • 6 max
  • 65%
  • Mineral
    Spirit

ALQUIMEX SM-65X

Good gloss, quick drying, good hardness and weather resistance. Compatible with acrylic resins and isocyanates. Recommended for formulating primers, industrial enamels, low-bake enamels and 2K PU varnishes.

TDS
  • Z2-Z4
  • 9 max
  • 7 max
  • 65%
  • Xylene

Alquimex SM-80ABX

High solids resin with good gloss, drying and weather resistance for the formulation of primers, industrial enamels, baking systems and varnishes.

TDS
  • Z1-Z3
  • 10 max
  • 8 max
  • 80%
  • Arom. 100 / But Acetate
Widely used conventional resins that provide great versatility for formulating domestic and industrial enamels, primers and traffic paint.
  • Viscosity
  • Acid Value
  • Color
  • Solids %
  • Solvent

ALQUIMEX S-50GN

High viscosity resin with standard drying, good gloss, color retention and wetting, as well as good anchoring on metallic surfaces and pigments. It is used to formulate medium-drying and primary household enamels and is compatible with maleic resins.

TDS
  • Z8-Z10
  • 15 max
  • 4 max
  • 50%
  • Mineral Spirit

ALQUIMEX S-50LV

Version of Alquimex S-50GN in a lower viscosity.

TDS
  • Z2-Z5
  • 12 max
  • 6 max
  • 50%
  • Mineral Spirit

ALQUIMEX S-60GN

Resin that, in addition to its good anchoring on metal surfaces and pigments, is widely used in domestic and industrial enamels and low VOC enamels due to its good gloss, wetting and adhesion.

TDS
  • Z4-Z6
  • 12 max
  • 6 max
  • 60%
  • Mineral Spirit

ALQUIMEX S-50T

Designed primarily for application in traffic paint, this resin is compatible with chlorinated rubber which provides good gloss, drying, weather resistance and durability.

TDS
  • X-Z
  • 8 max
  • 5 max
  • 50%
  • Toluene

ALQUIMEX S-60VMP

Good stability, low color and greater flexibility. It has good anchorage on metal surfaces and is also used in traffic paint where low VOC levels are required.

TDS
  • Z3-Z5
  • 8 max
  • 6 max
  • 60%
  • VM&P
They are widely used conventional resins that provide great versatility for formulating domestic and industrial enamels, primers and traffic paint.
  • Viscosity
  • Acid Value
  • Color
  • Solids %
  • Solvent

ALQUIMEX LS-60

Good stability, low color and high resistance to oxidation. Its main application is in the manufacture of thermoplastic paint, as the main part of the binder with good adhesion and color power.

TDS
  • Y-Z1
  • 8 max
  • 6 max
  • 60%
  • Mineral Spirit

ALQUIMEX LS-70GN

Very good pigment wetting, easy brushability and good gloss and color retention. It is recommended for the manufacture of architectural and industrial enamels.

TDS
  • Z1-Z4
  • 10 max
  • 4 max
  • 70%
  • Mineral Spirit

ALQUIMEX LS-70LAMS

Version of Alquimex LS-70GN in Low Aromatic Mineral Spirit, a HAP's free version.

TDS
  • Z1-Z4
  • 12 max
  • 7 max
  • 70%
  • LAMS

ALQUIMEX LS-90LAMS

A low aromatic content, free HAP's and high solids resin. It has very good pigment wetting, easy brushability and good gloss retention. It is recommended for the manufacture of architectural and industrial enamels.

TDS
  • Z-Z1
  • 10 max
  • 8 max
  • 90%
  • LAMS

ALQUIMEX LS-100

Designed to comply with regulations where low VOC is required. This resin works as an excellent vehicle for architectural enamels and wood varnishes, providing good wetting of pigments. It is also used in the printing ink market, as a grinding vehicle and in offset inks.

TDS
  • W-Y
  • 10 max
  • 8 max
  • 100%
  • N/A
Alkyds with coconut oil or coconut fatty acid are considered non-oxidizing and are mostly used as plasticizers for nitrocellulose-based lacquers and wood sealants.
  • Viscosity
  • Acid Value
  • Color
  • Solids %
  • Solvent

ALQUIMEX CC-60X

Compatible with nitrocellulose, melamine and urea, with good adhesion, flexibility, color and gloss. Recommended for the formulation of low-bake enamels, as a plasticizer for nitrocellulose-based lacquers and sealants and wood coatings in general.

TDS
  • Z1-Z3
  • 8 max
  • 4 max
  • 60%
  • Xylene

ALQUIMEX CC-60XP

Version of Alquimex CC-60X based on coconut fatty acids. It is characterized by its excellent color, which is why it is recommended for the formulation of high-fired enamels.

TDS
  • Z1-Z4
  • 15 max
  • 4 max
  • 60%
  • Xylene

ALQUIMEX CC-70BA

Free HAP's alkyd compatible with nitrocellulose, melamine and urea. It is characterized by its low initial color, color retention, high gloss, adhesion and flexibility. Recommended for formulating high-baking enamels, nitrocellulose-based lacquers and sealants, and wood coatings in general.

TDS
  • Z1-Z3
  • 12 max
  • 4 max
  • 70%
  • Butyl Acetate

ALQUIMEX CC-70BC

Free HAP's alkyd compatible with nitrocellulose, melamine and urea. It is characterized by its low initial color, color retention, high gloss, adhesion and flexibility. Recommended for formulating high-baking enamels, nitrocellulose-based lacquers and sealants, and wood coatings in general.

TDS
  • Z1-Z4
  • 12 max
  • 4 max
  • 70%
  • Butil Cellosolve

ALQUIMEX CC-70IBTX

Free HAP's alkyd compatible with nitrocellulose, melamine and urea. It is characterized by its low initial color, color retention, high gloss, adhesion and flexibility. Recommended for formulating high-baking enamels, nitrocellulose-based lacquers and sealants, and wood coatings in general.

TDS
  • Y-Z1
  • 12 max
  • 4 max
  • 70%
  • Isobutanol - Tol - Xileno

ALQUIMEX CC-80BA

Version of Alquimex CC-70BA with higher solids content.

TDS
  • Z5-Z8
  • 12 max
  • 4 max
  • 80%
  • Butyl Acetate
Resins modified with different oils or monomers that provide good hardness, drying and adhesion properties in baking, industrial and domestic enamels.
  • Viscosity
  • Acid Value
  • Color
  • Solids %
  • Solvent

ALQUIMEX SE-50X

Alkyd modified with Styrene Monomer that provides excellent drying speed, gloss and corrosion resistance for fast-drying enamels and varnishes and aerosol applications.

TDS
  • Z3-Z5
  • 15 max
  • 4 max
  • 50%
  • Xylene

ALQUIMEX SVT-60X

Alkyd modified with Vinyl Toluene that offers excellent solubility with other solvents, adhesion and provides excellent drying speed. It is used to formulate fast-drying coatings, industrial and household enamels, primers and aerosol applications.

TDS
  • X-Z
  • 15 max
  • 4 max
  • 60%
  • Xylene

ALQUIMEX SVT-60LAMS

Version of Alquimex SVT-60X cut in LAMS for low VOC applications.

TDS
  • Z2-Z5
  • 15 max
  • 4 max
  • 60%
  • LAMS
Gum rosin stabilized with glycerin and modified with maleic, which provide good compatibility with solvents and nitrocellulose, for use in lacquers, sealants and thermoplastic paint.

R&B

Acid Value

Color

AMBERYL M-6

Good compatibility with aromatic solvents, nitrocellulose and plasticizers for low color applications and good stability in lacquers and sealants.

TDS

125-135

25 max

8 max

AMBERYL M-9S

Good compatibility with polar solvents, nitrocellulose and plasticizers for low color, low viscosity and good stability applications in lacquers and sealants.

TDS

130-140

45 max

8 max

AMBERYL M-15A

Good compatibility with polar solvents and nitrocellulose, for high color and low viscosity applications in lacquers and sealants.

TDS

130-140

45 max

11 max

Water reducible alkyd resins for HAP’s free systems with good drying and gloss.
  • Viscosity
  • Acid Value
  • Color
  • Solids %
  • Solvent

Alquimex WR-70EB

Water reducible alkyd featuring high gloss and adhesion to substrates for industrial applications.

TDS
  • Z5-Z7
  • 38 max
  • 8 max
  • 75%
  • EB (Ethylene Glycol MonoButyl Ether)

Request TDS

Request TDS

Request TDS

Request TDS

Request TDS

Request TDS

Request TDS

Request TDS

Request TDS

Request TDS

Solicitar TDS

Solicitar TDS

Request TDS

Solicitar TDS

Request TDS

Solicitar TDS

Request TDS

Request TDS

Request TDS

Solicitar TDS

Request TDS

Request TDS

Request TDS

Gum rosin structurally modified by catalytic reaction that provides greater resistance to oxidation and better adhesion property.
  • R&B
  • Acid Value
  • Color

AMBERYL CT-224

Designed to provide greater compatibility with polar solvents and adhesiveness in the manufacture of flexographic inks.

TDS
  • 95-105
  • 160 min
  • 11 max

AMBERYL 650

Excellent adhesion promoter, does not tend to crystallize and has high stability and resistance to oxidation. Its use is recommended in floor adhesives and under carpets.

TDS
  • 78-86
  • 130 min
  • 13 max
Gum rosin esterified with pentaerythritol and modified with maleic, which have high compatibility with oils and viscoelasticity. Its properties allow it to partially replace phenolic resins in offset inks
  • R&B
  • Acid Value
  • Color

AMBERYL MP-15

Low viscosity and low softening point, which is highly compatible with mineral oils in the manufacture of offset inks

TDS
  • 118-128
  • 25 max
  • 11 max

AMBERYL MP-25

Low viscosity with a medium softening point, which has good compatibility with mineral oils in the manufacture of offset inks.

TDS
  • 130-145
  • 20 max
  • 12 max

AMBERYL MP-30

Used in the manufacture of offset inks and wood inks. Also used as an additive to modify gloss, hardness and drying of films in enamels and varnishes and in the manufacture of rubber compounds such as tires.

TDS
  • 135-145
  • 25 max
  • 11 max

AMBERYL MP-35

Used in the manufacture of offset inks and wood inks. Also used as an additive to modify gloss, hardness and drying of films in enamels and varnishes and in the manufacture of rubber compounds such as tires.

TDS
  • 145-160
  • 25 max
  • 11 max

AMBERYL MP-45

Medium viscosity and high softening point, which has good compatibility with mineral oils in the manufacture of offset inks.

TDS
  • 145-155
  • 25 max
  • 11 max

AMBERYL MP-50S

High viscosity with high softening point, used in the manufacture of offset inks

TDS
  • 155-170
  • 25 max
  • 11 max

Amberyl MP-60

Medium softening point and very high acidity that has good compatibility with aromatic solvents and alkaline water for use in the coating of citrus fruits and in inks in general

TDS
  • 130-140
  • 135-145
  • 11 max

Amberyl MP-61

Medium softening point and very high acidity that has good compatibility with aromatic solvents and alkaline water for use in the coating of citrus fruits and in inks in general.

TDS
  • 118-128
  • 175-186
  • 13 max

AMBERYL MP-70

High acid value, high viscosity and high softening point for formulations in which it is required to increase the physical and mechanical properties in the manufacture of offset inks and also applied in the manufacture of synthetic paper.

TDS
  • 170-180
  • 50-70
  • 8 max
Gum rosin esterified with pentaerythritol and stabilized, which provide excellent adhesion and resistance to oxidation.
  • R&B
  • Acid Value
  • Color

AMBERYL 1085

In addition to the properties it imparts of color retention, adhesion and compatibility with other polymers, provides good performance at slightly higher temperatures in the manufacture of Hot Melt adhesives.

TDS
  • 102-110
  • 15 max
  • 5 max

AMBERYL 1086

In addition to the properties it imparts of color retention, adhesion and compatibility with other polymers, provides good performance at slightly higher temperatures in the manufacture of Hot Melt adhesives and Road Marking.

TDS
  • 104-112
  • 20 max
  • 5 max

AMBERYL 1097

Broad compatibility with other polymers, color stability and good adhesion. The main application of this resin is in the manufacture of Hot Melt adhesives.

TDS
  • 94-104
  • 15 max
  • 5 max

AMBERYL 1098

Good color stability, adhesion and temperature resistance, for application in Hot Melt adhesives.

TDS
  • 98-108
  • 15 max
  • 5 max

AMBERYL 1115

Very high softening point rosin ester that has good color stability, adhesion and temperature resistance for application in special Hot Melt adhesives.

TDS
  • 108-117
  • 15 max
  • 5 max

AMBERYL 1200

Good color stability, adhesion and temperature resistance, as well as having broad compatibility with other polymers. It is mainly used in Hot Melt adhesives and in the manufacture of thermoplastic paint.

TDS
  • 98-108
  • 15 max
  • 5 max
Gum rosin stabilized with glycerin and modified with maleic, which provide good compatibility with solvents and nitrocellulose, for use in lacquers, sealants and thermoplastic paint.

R&B

Acid Value

Color

AMBERYL M-6

Good compatibility with aromatic solvents, nitrocellulose and plasticizers for low color applications and good stability in lacquers and sealants.

TDS

125-135

25 max

8 max

AMBERYL M-9S

Good compatibility with polar solvents, nitrocellulose and plasticizers for low color, low viscosity and good stability applications in lacquers and sealants.

TDS

130-140

45 max

8 max

AMBERYL M-15A

Good compatibility with polar solvents and nitrocellulose, for high color and low viscosity applications in lacquers and sealants.

TDS

130-140

45 max

11 max

AMBERYL M-19B

Good stability, low color and high resistance to oxidation. It is compatible with solvents (except alcohols), other resins and plasticizers. Its main application is in the manufacture of thermoplastic paint, as the main part of the binder with good adhesion and color power.

TDS

100-110

45 max

6 max

AMBERYL M-19S

Good stability, low color and high resistance to oxidation. It is compatible with solvents (except alcohols), other resins and plasticizers. Its main application is in the manufacture of thermoplastic paint, as the main part of the binder with good adhesion and color power.

TDS

103-110

40 max

6 max

AMBERYL M-20

Good stability, low color and high resistance to oxidation. It is compatible with solvents (except alcohols), other resins and plasticizers. Its main application is in the manufacture of thermoplastic paint, as the main part of the binder with good adhesion and color power.

TDS

108-118

45 max

6 max

Gum rosin esterified with glycerin and stabilized, which have good resistance to oxidation, thermal stability, adhesion and open time, for contact adhesives.
  • R&B
  • Acid Value
  • Color

AMBERYL GR-740

High resistance to oxidation and mechanical stability and is an adhesion promoter for EVA and various elastomers. Its main application is for solvent-based and water-based contact adhesives.

TDS
  • 80-90
  • 8 max
  • 5 max

AMBERYL GR-760

High resistance to oxidation and mechanical stability and is an adhesion promoter for EVA and various elastomers. Its main application is for solvent-based and water-based contact adhesives.

TDS
  • 77-86
  • 6 max
  • 6 max

AMBERYL GR-780

High resistance to oxidation, high softening point and high acidity. It is an adhesion promoter and its main application is for solvent-based and water-based contact adhesives.

TDS
  • 90-100
  • 20 max
  • 5 max

AMBERYL GR-780 PTP

It is more resistant to oxidation and temperature, has a high softening point, and is acidic. It acts as an adhesion promoter, and its main application is thermoplastic paint.

TDS
  • 90-100
  • 20 max
  • 6 max
Rosin structurally modified to improve its resistance to oxidation and adhesion.
  • R&B
  • Acid Value
  • Color

BREDEX 100

Disproportionate resin that presents excellent resistance to oxidation, stability and adhesive properties. Its main applications are in the manufacture of tar soap, adhesives and coatings.

TDS
  • 60 min
  • 130 min
  • 6 max

BREFOR 850

Disproportionated and partially saponified rosin soap with potassium hydroxide. Used as a water-based emulsifier for the production of synthetic rubber in SBR and NBR emulsions.

TDS
  • N/A
  • 12-18
  • 5 max

DISPROPORTIONATED ROSIN SOAP

Disproportionated rosin soap and partially saponified with potassium hydroxide. Used as a water-based emulsifier for the manufacture of synthetic rubber in SBR and NBR emulsion.

TDS
  • N/A
  • 150 min
  • 6 max
Gum rosin esterified with pentaerythritol and modified with maleic, which have high compatibility with oils and viscoelasticity. Its properties allow it to partially replace phenolic resins in offset inks
  • R&B
  • Acid Value
  • Color

Amberyl MP-60

Medium softening point and very high acidity that has good compatibility with aromatic solvents and alkaline water for use in the coating of citrus fruits and in inks in general

TDS
  • 130-140
  • 135-145
  • 11 max

Amberyl MP-61

Medium softening point and very high acidity that has good compatibility with aromatic solvents and alkaline water for use in the coating of citrus fruits and in inks in general.

TDS
  • 118-128
  • 175-186
  • 13 max
Gum rosin esterified with various polyols and modified with fumaric acid, with high compatibility and solubility for flexographic printing inks, providing hardness, gloss and drying.
  • R&B
  • Acid Value
  • Color

AMBERYL 815

Low acid value, compatibility with alcohols and good drying for citric coatings and manufacturing flexographic inks.

TDS
  • 135-150
  • 127-147
  • 11 max

AMBERYL 840

Medium acid value, high hardness, high gloss and quick drying for coating citrus fruits and manufacturing solvent-based flexographic inks.

TDS
  • 140-155
  • 160-180
  • 11 max

AMBERYL F-375

Low viscosity and high gloss for the production of solvent-based and water-based flexographic inks. This resin exhibits a high content of bio-renewable raw materials (%BRC).

TDS
  • 145-165
  • 190-200
  • 11 max
Resinas de colofonia esterificadas con pentaeritritol y modificadas con maleico, que presentan alta compatibilidad con aceites y viscoelasticidad. Sus propiedades permiten sustituir parcialmente las resinas fenólicas en tintas offset.
  • R&B
  • Acidéz
  • Color

AMBERYL MP-60

Resina con punto de ablandamiento medio y muy alta acidez que presenta buena compatibilidad con solventes aromáticos y agua alcalina para su uso en el recubrimiento de cítricos y en tintas en general.

TDS
  • 130-140
  • 135-145
  • 11 máx

AMBERYL MP-61

Resina con punto de ablandamiento medio y muy alta acidez que presenta buena compatibilidad con solventes aromáticos y agua alcalina para su uso en el recubrimiento de cítricos y en tintas en general.

TDS
  • 118-128
  • 175-186
  • 13 máx
Resinas de colofonia esterificadas con diversos polioles y modificadas con acido fumárico, de alta compatibilidad y solubilidad para tintas de impresión flexográfica brindando dureza brillo y secado.
  • R&B
  • Acidéz
  • Color

AMBERYL 815

Presenta acidez baja, compatibilidad con alcoholes y buen secado para recubrimiento de cítricos y fabricación de tintas flexográficas.

TDS
  • 135-150
  • 127-147
  • 11 máx

AMBERYL 840

Presenta acidez media, alta dureza, alto brillo y secado rápido para recubrimiento de cítricos y fabricación de tintas flexográficas base solvente

TDS
  • 140-155
  • 160-180
  • 11 máx

AMBERYL F-375

Presenta baja viscosidad y alto brillo para la fabricación de tintas flexográficas base solvente y base agua. Esta resina exhibe un alto contenido de materias primas de origen bio-renovable (%BRC).

TDS
  • 145-165
  • 190-200
  • 11 máx
Gum rosin esterified with pentaerythritol and modified with maleic, which have high compatibility with oils and viscoelasticity. Its properties allow it to partially replace phenolic resins in offset inks
  • R&B
  • Acid Value
  • Color

AMBERYL MP-35

Used in the manufacture of offset inks and wood inks. Also used as an additive to modify gloss, hardness and drying of films in enamels and varnishes and in the manufacture of rubber compounds such as tires.

TDS
  • 145-160
  • 25 max
  • 11 max

AMBERYL MP-45

Medium viscosity and high softening point, which has good compatibility with mineral oils in the manufacture of offset inks.

TDS
  • 145-155
  • 25 max
  • 11 max
Resinas de colofonia esterificadas con pentaeritritol y modificadas con maleico, que presentan alta compatibilidad con aceites y viscoelasticidad. Sus propiedades permiten sustituir parcialmente las resinas fenólicas en tintas offset.
  • R&B
  • Acidéz
  • Color

AMBERYL MP-35

Resina empleada en la fabricación de tintas offset y tintas para madera. También utilizada como aditivo modificador de brillo, dureza y secado de películas en esmaltes y en barnices y en la fabricación de compuestos de hule como llantas.

TDS
  • 145-160
  • 25 máx
  • 11 máx

AMBERYL MP-45

Resina de viscosidad media y alto punto de ablandamiento, que presenta buena compatibilidad con aceites minerales en la fabricación de tintas offset.

TDS
  • 145-155
  • 25 máx
  • 11 máx
Gum rosin stabilized with glycerin and modified with maleic, which provide good compatibility with solvents and nitrocellulose, for use in lacquers, sealants and thermoplastic paint.

R&B

Acid Value

Color

AMBERYL M-19B

Good stability, low color and high resistance to oxidation. It is compatible with solvents (except alcohols), other resins and plasticizers. Its main application is in the manufacture of thermoplastic paint, as the main part of the binder with good adhesion and color power.

TDS

100-110

35-45

6 max

AMBERYL M-19S

Good stability, low color and high resistance to oxidation. It is compatible with solvents (except alcohols), other resins and plasticizers. Its main application is in the manufacture of thermoplastic paint, as the main part of the binder with good adhesion and color power.

TDS

103-110

30-40

6 max

AMBERYL M-20

Good stability, low color and high resistance to oxidation. It is compatible with solvents (except alcohols), other resins and plasticizers. Its main application is in the manufacture of thermoplastic paint, as the main part of the binder with good adhesion and color power.

TDS

108-118

30-45

6 max

Resinas derivadas de colofonia estabilizadas con glicerina y modificadas con maléico, que proporcionan buena compatibilidad con solventes y nitrocelulosa, para uso en lacas, selladores y pintura termoplástica.

R&B

Acidez

Color

AMBERYL M-19B

Presenta buena estabilidad, bajo color y alta resistencia a la oxidación. Es compatible con solventes (excepto alcoholes), con otras resinas y plastificantes. Su principal aplicación se encuentra en la fabricación de pintura termoplástica, como parte principal del aglutinante con buen poder de adhesion y color.

TDS

100-110

35-45

6 máx

AMBERYL M-19S

Presenta buena estabilidad, bajo color y alta resistencia a la oxidación. Es compatible con solventes (excepto alcoholes), con otras resinas y plastificantes. Su principal aplicación se encuentra en la fabricación de pintura termoplástica, como parte principal del aglutinante con buen poder de adhesion y color.

TDS

103-110

30-40

6 máx

AMBERYL M-20

Presenta buena estabilidad, bajo color y alta resistencia a la oxidación. Es compatible con solventes (excepto alcoholes), con otras resinas y plastificantes. Su principal aplicación se encuentra en la fabricación de pintura termoplástica, como parte principal del aglutinante con buen poder de adhesion y color.

TDS

108-118

30-45

6 máx

Stabilized glycol ester resins to provide good mechanical strength in specialty adhesive applications.
  • R&B
  • Acid Value
  • Color

ESTER DB

Crystalline resin completely soluble in aromatic and aliphatic solvents and compatible with elastomers and rubbers. It has excellent adhesion in adhesives applied at low temperatures and is easily emulsifiable in water.

TDS
  • 30-40
  • 25 max
  • 6 max

ESTER TB

Resin completely soluble in aromatic and aliphatic solvents and compatible with elastomers and rubbers. This resin is used as a plasticizer in adhesives.

TDS
  • N/A
  • 20 max
  • 8 max
Gum rosin esterified with various polyols and modified with fumaric acid, with high compatibility and solubility for flexographic printing inks, providing hardness, gloss and drying.
  • R&B
  • Acid Value
  • Color

AMBERYL 800

Low acid value and is used for the manufacture of water- or solvent-based flexographic inks, providing hardness and brightness.

TDS
  • 130-140
  • 120-130
  • 11 max

AMBERYL 815

Low acid value, compatibility with alcohols and good drying for citric coatings and manufacturing flexographic inks.

TDS
  • 135-150
  • 127-147
  • 11 max

AMBERYL 830

Medium acid value, high compatibility with solvents and other polymers for the manufacture of solvent-based flexographic inks and alcohol-based nitrocellulose lacquers.

TDS
  • 145-160
  • 170-185
  • 11 max

AMBERYL 833

High acid value, high compatibility with solvents, and with other polymers for the production of solvent-based flexographic inks and alcohol-based nitrocellulose lacquers.

TDS
  • 140 min
  • 290-310
  • 10 max

AMBERYL 840

Medium acid value, high hardness, high gloss and quick drying for coating citrus fruits and manufacturing solvent-based flexographic inks.

TDS
  • 140-155
  • 160-180
  • 11 max

AMBERYL 875

High viscosity and low acidity for the manufacture of water- or solvent-based flexographic inks, providing hardness and gloss.

TDS
  • 145-160
  • 110-125
  • 11 max

AMBERYL 880

High acid value and high gloss for use in the manufacture of solvent-based flexographic inks.

TDS
  • 145-165
  • 225-245
  • 11 max

AMBERYL 890LV

Low viscosity and high gloss for use in the manufacture of solvent-based and water-based flexographic inks.

TDS
  • 150-160
  • 190-200
  • 11 max

AMBERYL 895

Low viscosity and high gloss for the manufacture of solvent-based and water-based flexographic inks. This resin exhibits a high content of raw materials of bio-renewable origin (%BRC).

TDS
  • 150-160
  • 190-200
  • 11 max

AMBERYL CT-5014

Low polarity and good color for the manufacture of solvent-based and water-based flexographic inks.

TDS
  • 130-145
  • 170-185
  • 8 max

AMBERYL F-375

Low viscosity and high gloss for the production of solvent-based and water-based flexographic inks. This resin exhibits a high content of bio-renewable raw materials (%BRC).

TDS
  • 145-165
  • 190-200
  • 11 max

AMBERYL RFAAS

It is used in the manufacture of water-based flexographic inks with high solids content.

TDS
  • 125 min
  • 160-180
  • 11 max

Request TDS